DMX-Link Central - for Ethernet cable termination and optional midspan power insertion 
DMX-Link 
DMX512 over an Ethernet backbone
 
DMX-Link Central  is used to terminate building ethernet cables and optionally add low voltage power. This allows powered ethernet products such as DMX-Link to be powered over the CAT5 cable. The building cables are terminated to rear mounted krone style punch down connectors. Power is applied to these connections via an electronic fuse rated at 170mA. The front panel provides latching Neutric Ethercon RJ45 connectors for connection to an external Ethernet Hub or switch. No power is applied to the front panel connectors. A total of twelve ports are provided. These are split into two banks of six. A power supply is required for each bank of six outlets. This may be ordered as our PS_DMX_LC. 
  Features: 
  • 12 Ethernet Cable Termination points
  • Insert power on to CAT5 cable
  • Electronic cable protection
  • Power state indication
  • Reverse polarity protection
  • Latching Ethercon RJ45
  Specifications: 
  • Listing: CE FCC 
  • IP Rating: Indoor use 
  • Output Voltage: 24VDC (with optional external power supplies)
  • Output Current: 170mA per outlet 
  • Height: 1RU 
  • Width: 19 inches
  • Depth: 4.5 inches
  • Weight: 1 lb
  • Part # FD DMX-LC
Professional net  price: $435.00
PS DMX_LC power supply - 24VDC out at 1 amp. 
Input Voltage Range: 85-265 VAC -
Frequency Range: 47-63 Hz
Price: $50.00
You may a download the print version of this data sheet. (61K)

This file is in PDF format. You will need a PDF viewer to read and print it. If you do not have one it may be downloaded for free from Adobe.


Goddard Design Company
51 Nassau Avenue
Brooklyn NY 11222
718 599 0170 - 718 599 0172 fax
sales@goddarddesign.com - http://www.goddarddesign.com 

Return to Goddard Design Co. home page
This page update on Jan. 2, 2003
© copyright Goddard Design Co. 2003