Weird
Stuff
We
Don't
Need
But you
might find useful
And
at a great price .. . .
|
|
Surplus Electronics
Components - unused, old stock items at a great price
DYS projection Lamp
As pictured, unused but old stock
We have at least 10 pcc.
$2.50 each plus shipping
Heat Sink
Aavid Thermalloy heatsinks.Model
508322B00000. Current price in lots of 3000 is $3.29. Will
sell for $1.75. We have at least 50 pcs. Shipping additional
Steel Belt Clip
A steel belt clip that actually stays on your belt.
Designed for the Chaos Audio beltpack.
We have a surplus of these belt clips, and you can
buy them for $2.75 each. Contact us for quantity
discount.
Basic clip is 2.7"x1.0" You can view a dimensioned drawing with this link
Hall Effect proximity switches
Hall Effect proximity switches made by Namco, purchased
for a project that ended up not using them. Brand new switches in
their original packaging. Still in current production - and if
you buy them from us, they'll cost you a LOT less!
Description: Namco Control #ET11022210
- tube diameter - 12 mm
- tube length - 78 mm
- sense distance - 2 mm
- max. switching frequency - 700 hz
- shielded
- 10-30 volts DC
- max. load current - 400 mA
- normally closed NPN sinking output
The current price is over $125. per switch.
We're asking $20. plus shipping. We have 15 pieces, and we're
selling them individually.
Please contact us directly to purchase. We'll
calculate the UPS for you.
Transformers, 120 VAC - 20 V
Center Tapped
Signal Transformer, 241-7-20. 56 VA transformer with a 20 volt
center
tapped secondary. Current production piece, old stock that's been
sitting on
our shelves. Mounting centers are 3-1/8"; weight is 1.7 lbs
unpacked.
12 pieces available for $10.each plus UPS.
Transformers, 120 VAC - 20 V
Center Tapped
Signal Transformer, 241-8-20. 100 VA transformer with a 20 volt
center tapp3ed secondary. Current production piece, old stock
that's
been sitting on our shelves. Mounting centers are 3-9/16"; weight
is 2.75 lb
unpacked
6 pieces available for $18. each plus UPS.
Slide Pots with Knob - Great for Consoles
These PCB mount slide pots have a unique covered track design that cuts
down on the dirt and foreign matter that contaminate the track.
Great for consoles!
Each piece has eight PCB mounting terminals - one for each end to the
resistive track, two for the wiper, and four for mechanical
support.
$1.00 each plus UPS - call us
for quantity pricing
Teac Audio Fader
Large slide fader with very
smooth action. 10k audio taper potentiometer. Units approx.
1" wide with overall length of
5.3". Travel of 4". Unused, old stock. A bargain at
$7. each
plus shipping.
3
HP
motors, Permanent Magnet, 180 Volt 1800 RPM- Hampton Products
Motor 1
You
are
buying one of the motors shown to the right, the Top one. This motor was used
as part of a test setup, and has very few hours of operation.
Specifications:
Model:
03219
Frame:
182BC
Horsepower:
3
Enclosure:
TEFC
RPM:
1800
Volts:
0-180
Torque
(pounds/inch):
108
Amps:
13.7
Duty:
Continuous
Weight:
approx.
75 lbs.
$300 or best offer
Please
contact
us for shipping information and costs.
Motor 2
You
are
buying one of the motors shown to the right, the Bottom one. This motor was used
as part of a test setup, and has very few hours of operation.
Specifications:
Model:
3319
Frame:
184A
Horsepower:
3
Enclosure:
TEFC
RPM:
1800
Volts:
0-180
Torque
(pounds/inch):
108
Amps:
15.5
Duty:
Continuous
Weight:
approx.
75 lbs.
$300 or best offer
Please
contact
us for shipping information and costs
Goddard
Design
Company
51 Nassau Ave.
Brooklyn NY 11222 USA
718
599-0170
718 599-0172 fax
http://www.goddarddesign.com
Return
to
Goddard Design Co. home page
© copyright Goddard Design Co. 2011
last updated Sept 2, 2014
|